Reference	Decription	Value	Price	Conrad ordernumber	Remarks

R1-R8		resistor 1/4W	560
R9,R10,13	resistor 1/4W	100
R11		resistor 1/4W	1M
R12		resistor 1/4W	820k

C1		capacitor MKP	100n		0,37	458325 - 89 
C2		capacitor MKP	330n		0,70	458350 - 89	use with 230V/50Hz
C2		capacitor MKP	680n		1,27	458376 - 89	use with 120V/60Hz (couldn't find 560nF)
C3		elco		330µ		0,14	445240 - 89
C4		cap. keramic	100n		0,21	453358 - 89
C5		cap. keramic	150p		0,13	451754 - 89
C6		elco		4µ7		0,10	446240 - 89

D1,D2		diode		1N4004		0,08	162248 - 89

D3		zener diode	v3.3 1/2w	0,21	180041 - 89	*1


D4,D5		diode		1N4148		0,05	162280 - 89

L1		coil		5A 65uH		1,76	534439 - 89

T1-T8		triac		TIC 206D	1,02	186333 - 89	BT136-600D is replacement

IC1		voltage reg.						*2
IC2		mpu Atmel	ATTiny2313-20	3,45	154166 - 89
		IC socket 	20 pin		0,55	189839 - 89

		IR receiver	TSOP 31236

X1-4		connector	MKDSN 1,5/ 3	0,55	743678 - 89
SV1		header

F1		fuse		5A slow		1,69	551120 - 89	(packaged by 10)
F2		fuse		500mA slow	1,69	533467 - 89	(packaged by 10)
F1,F2		fuse holder			0,29	533866 - 89

*1 Use 3.3V zener when no regulator available

*2 A 3.3v negative regulator is hard to get read article about a solution

Prices are subject to change ;-)